Skip to content

10% off orders over $100

O'Neal 5srs & 10srs Helmet Chin Mounts for Action Cameras

O'Neal 5srs & 10srs Helmet Chin Mounts for Action Cameras

 

O’Neal has put some thought into their 5SRS and 10SRS helmets, keeping them fairly lightweight at about 1380 grams (about 3 pounds for those still measuring things in pounds) using an ABS shell. Both lids also have removable and washable moisture wicking liners that when combined with their more-than-adequate venting will help keep you cool on the dusty trail. Finally, the visor is adjustable, allowing you to put it in the perfect position for your ride.

Speaking of adjustable for the perfect position…(see what we did there?)

We designed our 3d printed chin mounts to extend far enough from your chinbar to allow the camera to have enough “tip back” angle. When you are standing on your pegs, this tip back angle allows you to align the camera with your eyeport on the helmet to get a parallel view of the terrain - a little of the bike, a little of the horizon - you know, the perfect perspective.

We have found that the chin mount location is optimal for a POV camera for a couple of reasons. First, audio pickup is much better. With the camera in front of your mouth you can clearly hear yourself swearing as your buddy pulls away or laughing when the same buddy gets stuck in the rut you warned him about 10 minutes earlier. Second, your camera does not stick out where a tree branch can knock it out of alignment, or worse, send it tumbling into the weeds or off the side of a cliff. While there is a chance that you may hit the camera if you crash, we have found that most people do their best to turn their head to avoid a face full of dirt whenever possible. Even if you do go chin first into a rock, we can promise you that the mount will not break.

That is a bold statement, one that we back up with a lifetime warranty. Hassle free, just let us know and we will get a new one out to you.

Our chin mounts are made of Thermoplastic Polyurethane which has rubber-like properties. This allows us to make mounts that are flexible enough to twist into a pretzel, but strong enough to keep your camera pointed exactly where you aim it without inducing vibration even at full boogie over rocky terrain.

We designed the mounts for maximum convenience, not just durability. The GoPro mounting screw is on the opposite side making it easier to access the battery side door. We also have notches to help you get a consistent tip back angle every time. You should be able to fit most cameras from GoPro to DJI Osmo and everything in between on our custom-fit mounts.

The mounts for the O’Neal 5SRS and 10SRS helmets are designed to be removable without leaving any residue on the helmet, and we do offer replacement 3M mounting tape if you want to reattach it later. That said, you will need to also pick up some Gorilla Clear Grip Glue (say that five times fast) to adhere the tape to the mount.

If you were wondering if our mounts work with the Media Mod, the answer is yes, so get out there and make some epic content.

For samples of what kind of perspective our mounts can give you, check out our Instagram channel. That is unless you are under 15, then you can hit up our TikTok. If you are baffled by both of those, we also showcase our hooligan antics on YouTube. Whatever you choose, you can see why mounting your camera to the chinbar is the best way to capture the action.

In the box:

  • Chin Mount for the O'Neal 5 or 10 series helmets.
  • Mounting screw
  • Sweet WannaBes stickers.
  • Alcohol Pad

Optional Accessories Available For Purchase

 

 

Older Post
Newer Post

Leave a comment

Please note, comments must be approved before they are published

Close (esc)

Popup

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Search

Shopping Cart

Your cart is currently empty.
Shop now