Skip to content

70 Helmet Styles | 2000 Mounts Sold

Answer AR1 & AR3 Helmet Chin Mounts for Action Cameras

Answer AR1 & AR3 Helmet Chin Mounts for Action Cameras

The Answer AR-1 and AR-3 helmets give you the best bang for your buck when it comes to lids offered by the brand. Both helmets pass the D.O.T. and ECE safety standards thanks in part to the dual-density EPS liner, and they keep you cool with plenty of airflow through the two intake, four exhaust vents.

Speaking of cool, let’s talk about a quick way to elevate your video content game to the next level whether you are using a GoPro, DJI Osmo, Insta360, or any other action camera.

We make custom 3D printed mounts that are designed to extend far enough from your chinbar to allow the camera to have enough “tip back” angle. When you are standing on your pegs, this tip back angle allows you to align the camera with the eyeport on your helmet to get a parallel view of the terrain - a little of the bike, a little of the horizon - you know, the perfect perspective.

An Answer AR3 helmet with the wannabes chin mount installed. Helmet is slightly grayed out, 3 angles of the wannabes chin mount are arrayed in front.

We have found that the chin mount location is optimal for a POV camera for a couple of reasons. First, audio pickup is much better. With the camera in front of your mouth you can clearly hear yourself swearing as your buddy pulls away or laughing when the same buddy gets stuck in the rut you warned him about 10 minutes earlier. Second, your camera does not stick out where a tree branch can knock it out of alignment, or worse, send it tumbling into the weeds or onto the trail where it can get run over by your buddy when they make it out of the rut. While there is a chance that you may hit the camera if you crash, we have found that most people do their best to turn their head to avoid a face full of dirt whenever possible. Even if you do go chin first into a rock, we can promise you that the mount will not break.

That is a bold statement, one that we back up with a lifetime warranty. Hassle free, just let us know and we will get a new one out to you.

Our chin mounts are made of Thermoplastic Polyurethane which has rubber-like properties. This allows us to make mounts that are flexible enough to twist into a pretzel, but strong enough to keep your camera pointed exactly where you aim it without inducing vibration even at full boogie over rocky terrain.

A picture of the Answer AR1 helmet on a white background. The helmet has the WannaBes chin mount and a gopro installed.

We designed the Answer AR-1 and AR-3 mounts for maximum convenience, not just durability. The GoPro mounting screw is on the opposite side making it easier to access the battery side door. We also have notches to help you get a consistent tip back angle every time. You should be able to fit most cameras from GoPro to DJI Osmo and everything in between on our custom-fit mounts.

The mounts are designed to be removable without leaving any residue on the helmet, and we do offer replacement 3M mounting tape if you want to reattach it later. That said, you will need to also pick up some Gorilla Clear Grip Glue (say that five times fast) to adhere the tape to the mount.

If you were wondering if our mounts work with the Media Mod, the answer is yes, so get out there and make some epic content.

See for Yourself!

For samples of what kind of perspective our mounts can give you both with and without The Influencer, check out our Instagram channel. That is unless you are under 15, then you can hit up our Tik Tok (just kidding, lot's of big kids are into dancing too 😏). If you are baffled by both of those, we also showcase our hooligan antics on YouTube. Whatever you choose, you can see why mounting your camera to the chinbar is the best way to capture the action.

In the box:

  • Chin Mount for the Answer helmet of your choice.
  • Mounting screw
  • Sweet WannaBes stickers (may or may not add 5hp 🤣).
  • Alcohol Pad

Optional Accessories Available For Purchase

 

 

Older Post
Newer Post

Leave a comment

Please note, comments must be approved before they are published

You may also enjoy

Idle & Cold Start Screw adjustment how-to | late model KTM EXC dirt bikes with EFI systems

I pointed out in my first ride video for my KTM 500EXC-F that the bike had a tendency to flame out quite a bit more than I thought it should, and after adding the GET ECU, I had a few issues restarting the beast. Both situations were pretty frustrating, and of course I caught them both on video. Here's how to fix that. 

How To Change And Bleed 🛠🏍 Front KTM Brembo Brakes | Replace Brake Pads and Brake Fluid

As they say, brakes only slow you down, but putting fresh pads on your machine shouldn't cost you too much time. If you have a KTM and need to replace your worn pads, it is actually a pretty simple task with a short list of tools required.

2021 KTM 500 EXC-F | First ride review, initial impressions | Monster Torque, but needs pipe and ECU

The WannaBes team recently picked up two brand new 2021 KTM 500 EXC-F enduro bikes from Malcom Smith Motorsports in Riverside, CA. After swapping out the stock street tires for some proper knobbies and adding a few pieces of armor, we take the bikes out for their first enduro ride and give you our first impressions raw from the trail.
Close (esc)

Popup

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Your cart is currently empty.
Shop now