Chin Mount for O'NEAL RACING SIERRA II Helmets









Capture your riding the way you see it. Chin mounts with the right tilt-back angle offer the best POV video possible. Our mounts make sure you don't sacrifice your helmet to get there.
Chin mount designed specifically for O'Neal Racing Sierra II helmets
A precision fit on O'Neal 2 Series helmets.
-
Perfectly compliments the style and curves of O'Neal 2 Series helmets
-
Best POV
-
Featherweight, you won’t know it’s there!
-
3D printed internal weave holds at least 20 lbs static weight
-
3M tape provides a reliable secure attachment to your helmet.
-
No holes, velcro, clamps, or straps.
-
We are hard enduro people at heart, but understand that sometimes you need to spend some time on tarmac to get to some choice single track. Helmets like O’Neal’s Sierra ADV are perfect for this task with features like the clear “windscreen”, standard off-road visor, and the drop-down tinted sun shield for those extra bright days.
Perfect camera angle, every time!
For Enduro, Motocross, and Adventure riding, chin mounts are the sweet spot of camera angle, depth perception, and point of view immersion for your viewers. Capture exactly what you see, every time.
-
Tilt indicator for the perfect angle each ride!
-
Eliminate awkward side views, flattened obstacles, and strained angles of other mounting locations.
Built by Riders & YouTubers
We designed the WannaBes mount because we needed a better system for our own action cameras. As users and YouTuber enthusiasts, we’re constantly adding unique features that make our mounts easier to use.
-
Great vocal reception
-
Protected from branches and other scrapes
-
Reverse screw direction allows easy access to later model GoPro battery doors WITHOUT removing the camera.
-
Tilt indicator gives you consistent camera angles each ride.
-
Embedded nut you can’t drop in the mud (even while wearing gloves).
-
Reversible camera position. Mount either up or down for the widest range of possible angles.
Camera Compatability
Our GoPro chin mounts are compatible with all GoPro models (10,9,8,7,6,5...) available and along with many other models such as Akaso, Garmin, DJI, or Sony. Our mounts are designed to accomodate GoPro camera protective cases or the GoPro Media Mod and will give you excellent tilt-back angles even when you use a case or mod.
*some camera models may require an adaptor (sold on Amazon, Walmart, etc) to convert to the GoPro style mounting forks.
Crash Proof Chin Mounts
The WannaBes chin mounts are now made from a flexible material called TPU which is nearly indestructable. Not only is it practically impossible to break one of our mounts, the rubberized material also acts as a damper for any impact to your camera, helping keep your whole system safer in a crash!
Installation Instructions
1. Test mount position on helmet
2. Remove backing of 3M tape
3. Spread mount wings gently
4. Install on helmet ensuring full contact on whole tape surface.
*watch our install video for details
All Day GoPro Battery
Checkout our video on how to run your GoPro all day without changing the batter!
Checkout Our Blog
Idle & Cold Start Screw adjustment how-to | late model KTM EXC dirt bikes with EFI systems
How To Change And Bleed 🛠🏍 Front KTM Brembo Brakes | Replace Brake Pads and Brake Fluid
2021 KTM 500 EXC-F | First ride review, initial impressions | Monster Torque, but needs pipe and ECU

Designed and Assembled in the United States by a Family Owned Business!
Shop risk free with low cost domestic shipping and hassle free returns!
Designed and Assembled in the United States by a Family Owned Business!
Shop risk free with low cost domestic shipping and hassle free returns!