Skip to content

Now Shipping to USA, Europe, Canada, and more! | 10% off orders over $100

Chin Mount for HJC DS-X1 Helmets

Regular price $39.99

Unit price per 

Every chin mount comes complete with:
*Version 2.0 "Unbreakable" chin mount
*Standard GoPro style screw
*Alcohol prep pad for cleaning
*Badass WannaBes stickers

Important Notes:

-Helmet NOT included

-GoPro NOT included

-Customs charges may apply to international deliveries and are your responsibility.

Capture your riding the way you see it. Chin mounts with the right tilt-back angle offer the best POV video possible. Our mounts make sure you don't sacrifice your helmet to get there. 

Chin mount designed specifically for HJC DS-X1 helmets

A precision fit on HJC DS-X1 helmets. 

  • Perfectly compliments the style and curves of HJC DS-X1 helmets

  • Best POV

  • Featherweight, you won’t know it’s there!

  • 3D printed internal weave holds at least 20 lbs. static weight

  • 3M tape provides reliable secure attachment to your helmet.

    • No holes, velcro, clamps, or straps.

Perfect camera angle, every time!

For Enduro, Motocross, and Adventure riding, chin mounts are the sweet spot of camera angle, depth perception, and point of view immersion for your viewers. Capture exactly what you see, every time.

  • Tilt indicator for the perfect angle each ride!

  • Eliminate awkward side views, flattened obstacles, and strained angles of other mounting locations.

Built by Riders & YouTubers

We designed the WannaBes mount because we needed a better system for our own action cameras. As users and YouTuber enthusiasts, we’re constantly adding unique features that make our mounts easier to use.

  • Great vocal reception

  • Protected from branches and other scrapes

  • Reverse screw direction allows easy access to later model GoPro battery doors WITHOUT removing the camera.

  • Tilt indicator gives you consistent camera angles each ride.

  • Embedded nut you can’t drop in the mud (even while wearing gloves).

  • Reversible camera position. Mount either up or down for widest range of possible angles.

This helmet may also be called:

  • DS-X1 Solid
  • DS-X1 Synergy
  • HJCDSX1
  • HJC DSX1

Camera Compatability

Our GoPro chin mounts are compatible with all GoPro models (10,9,8,7,6,5...) available and along with many other models such as Akaso, Garmin, DJI, or Sony. Our mounts are designed to accomodate GoPro camera protective cases or the GoPro Media Mod and will give you excellent tilt-back angles even when you use a case or mod.

*some camera models may require an adaptor (sold on Amazon, Walmart, etc) to convert to the GoPro style mounting forks.

Crash Proof Chin Mounts

The WannaBes chin mounts are now made from a flexible material called TPU which is nearly indestructable. Not only is it practically impossible to break one of our mounts, the rubberized material also acts as a damper for any impact to your camera, helping keep your whole system safer in a crash!

Installation Instructions

1. Test mount position on helmet

2. Remove backing of 3M tape

3. Spread mount wings gently

4. Install on helmet ensuring full contact on whole tape surface.

*watch our install video for details

Fequently Asked Questions

All Day GoPro Battery

Checkout our video on how to run your GoPro all day without changing the batter!

Read the blog instead

Checkout Our Blog

Idle & Cold Start Screw adjustment how-to | late model KTM EXC dirt bikes with EFI systems

I pointed out in my first ride video for my KTM 500EXC-F that the bike had a tendency to flame out quite a bit more than I thought it should, and after adding the GET ECU, I had a few issues restarting the beast. Both situations were pretty frustrating, and of course I caught them both on video. Here's how to fix that. 

How To Change And Bleed 🛠🏍 Front KTM Brembo Brakes | Replace Brake Pads and Brake Fluid

As they say, brakes only slow you down, but putting fresh pads on your machine shouldn't cost you too much time. If you have a KTM and need to replace your worn pads, it is actually a pretty simple task with a short list of tools required.

2021 KTM 500 EXC-F | First ride review, initial impressions | Monster Torque, but needs pipe and ECU

The WannaBes team recently picked up two brand new 2021 KTM 500 EXC-F enduro bikes from Malcom Smith Motorsports in Riverside, CA. After swapping out the stock street tires for some proper knobbies and adding a few pieces of armor, we take the bikes out for their first enduro ride and give you our first impressions raw from the trail.
Designed & Built in the United States

Designed and Assembled in the United States by a Family Owned Business!

Shop risk free with low cost domestic shipping and hassle free returns!

Close (esc)

Popup

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Search

Your cart is currently empty.
Shop now