Skip to content

Chin Mount for ARAI XD4 Helmets

Regular price $39.99

Unit price per 

Every chin mount comes complete with:
*Version 2.0 "Unbreakable" chin mount
*Standard GoPro style screw
*Alcohol prep pad for cleaning
*Badass WannaBes stickers

Important Notes:

-Helmet NOT included

-GoPro NOT included

-Light NOT included

-Customs charges may apply to international deliveries and are your responsibility.


Off-road or on, you deserve the best camera mounting option for your Arai XD4, and we are here to make the magic happen with our 3D printed chin mounts.


In our opinion, the best way to get a realistic recap of your ride is by using a properly set up chin mounted camera. Our custom-made 3D printed chin mount for your Arai XD4 is designed to allow for the perfect tip back angle to show just enough of your handlebars to give the correct perspective. Every ride that you do. MX, Enduro, hillclimbs, or just a quick jaunt to the grocery store all will look like you remember thanks to our mounts.

Tip back angle allows your action camera of choice to be parallel with your eyeport. None of that towering above you angle that a “teletubbie” mount shows, just a realistic look as to how tough your ride was. Since you go where you look, a chin mounted camera follows the action, which is cool for both showing the trail ahead or documenting the texting driver next to you.

Chin-mounting also puts the camera in the perfect spot to pick up audio for moto-vloggers. Whether you are giving a detailed description of the trail or swearing at the idiot tossing cigarette butts out his window on your commute, you will get clear audio, with or without the GoPro Media Mod.


Being riders ourselves we understand that anything that can get you back riding quicker is a bonus. That’s why we provide the ability to change batteries without removing the camera by placing the mounting screw on the opposite side of the access door on most GoPro cameras. If you do remove the camera for any reason, we included markings on the mount so you spend less time setting your tip back angle. 


We are so confident that you will not be able to break our mounts that we will replace it if you are able to. 

How can we be so sure?

We 3D print our mounts with TPU, a material with rubber-like properties making it flexible enough to literally run it over with a truck but stiff enough to provide a stable platform to record from. Yes, we tried the truck thing, and no we don’t think that any helmet or camera would have survived.  

We use the same 3M tape that GoPro does for a secure yet removable solution to your mounting needs. If you do decide to try and run your helmet over with a truck (please don’t), we also sell replacement tape so you can reuse your mount on your new Arai XD4.


GoPros are everywhere, but we understand that they aren’t the only game in town. This is why we made sure that our mounts work with most cameras, including those from DJI, Garmin, Sony, and Akaso in addition to all of the models offered by the originator of the action camera world, GoPro. Our mounts also work well with the GoPro Media Mod for those that want to take things to a slightly higher level.

Our mount is ready for all the canyon carving and/or dirt riding that you can handle, so show your fans on YouTube, Instagram, Facebook, TikTok, and any other platform how epic your rides are!

This helmet may also be called:

  • XD4 Africa twin
  • XD4 cover
  • XD4 depart
  • XD4 vision
  • XD4 aluminum silver
  • XD4 frost
  • XD4 fluorescent
  • XD-4
  • XD4

Camera Compatibility

Our action camera chin mounts are compatible with all GoPro models (Hero 11,10,9,8,7,6,5...) along with many other cameras such as models from Akaso, Garmin, DJI, or Sony. Our mounts are designed to accomodate GoPro's camera protective cases or their Media Mod and will give you excellent tilt-back angles even when you use a case or mod.

*some camera models may require an adaptor (sold on Amazon, Walmart, etc) to convert to the GoPro style mounting forks.

Crash Proof Chin Mounts

The WannaBes chin mounts are now made from a flexible material called TPU which is nearly indestructable. Not only is it practically impossible to break one of our mounts, the rubberized material also acts as a damper for any impact to your camera, helping keep your whole system safer in a crash!

Installation Instructions

1. Test mount position on helmet

2. Remove backing of 3M tape

3. Spread mount wings gently

4. Install on helmet ensuring full contact on whole tape surface.

*watch our install video for details

Fequently Asked Questions

All Day GoPro Battery

Checkout our video on how to run your GoPro all day without changing the batter!

Read the blog instead

Checkout Our Blog

Scott Strike eRIDE 930 eMTB | Electric Mountain Bike Review, Unboxing & First Ride | Enduro Cycling

Before you start telling us that e-bikes are cheating, let me remind you that we are the “WannaBes”, and, since we have no intent on going into professional mountain biking there is no such thing as cheating. Get over it, and remember that riding anything is supposed to be fun...

Fly Trekker and Kinetic Helmet Chin Mounts For GoPro Hero, DJI Osmo, Insta360 Action Cameras

While the mission to equip everyone with the ultimate action camera mount will forever be ongoing, it is nice to feel a sense of completion every once in a while. Over at WannaBes world HQ, we are basking in the glow of ticking the last two boxes as we introduce the final chin mounts for the Fly line of helmets - The Trekker for you ADV riders out there, and the Kinetic for those that prefer that their tires stay more or less in the dirt.

How to Check & Adjust 2021 KTM 500 EXC-F Shim Valves | 130 Hour 4 Stroke Dirt Bike Maintenance

Kjeld isn’t lazy, he just put off all maintenance on his KTM 500 EXC-F for about 130 hours...
Designed & Built in the United States

Designed and Assembled in the United States by a Family Owned Business!

Shop risk free with low cost domestic shipping and hassle free returns!

Close (esc)


Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.


Your cart is currently empty.
Shop now