Chin Mount for ARAI VX-PRO 4 Helmets








CHIN MOUNT FOR ARAI VX-PRO 4 HELMETS
If you are looking to capture video as it was intended to be viewed while wearing your Arai VX-Pro 4, we have the solution. A custom, 3d printed chin mount designed specifically for your lid!
WHY CHIN MOUNTING?
Chin mounted action cameras provide, in our opinion, the best angle to properly document every ride that you do. MX, Enduro, hillclimbs, or just a quick jaunt through your favorite secret trails all look like you remember thanks to our use of “tip-back angle”.
Tip what, now?
We designed our chin mounts to allow your action camera of choice to be parallel with your eyeport. This means that you get just the right amount of your bars in the frame to show perspective. None of that towering above you angle that a “teletubbie” mount shows, just a realistic look as to how tough your ride was. Since you go where you look, a chin mounted camera follows the action, making you something like an organic gimbal.
Chin-mounting also puts the camera in the perfect spot to pick up audio for moto-vloggers. Whether you are giving a detailed description of the trail or swearing as you crash, you will get clear audio, with or without the GoPro Media Mod.
DESIGNED BY RIDERS, FOR RIDERS
Being riders ourselves we understand that little things can get you back riding quicker, like providing the ability to change batteries without removing the camera. We made this easy by placing the mounting screw on the opposite side of the access door on most GoPro cameras. If you do remove the camera for any reason, we included markings on the mount so you spend less time setting your tip back angle.
INDESTRUCTIBILITY, WE GUARANTEE IT
We make our mounts with TPU, which has rubber-like properties making it flexible enough to literally run it over with a truck without being damaged. Yes, we tried it, and no we don’t think that any helmet or camera would have survived the “truck test”. We are so confident that you will not be able to break our mounts that we will replace it if you are able to.
We use the same 3M tape that GoPro does for a secure yet removable solution to your mounting needs. If you do decide to try and run your helmet over with a truck (please don’t), we also sell replacement tape so you can reuse your mount on your new Arai VX-Pro 4.
FITS MOST CAMERAS
GoPros are everywhere, but we understand that they aren’t the only game in town. This is why we made sure that our mounts work with most cameras, including those from DJI, Garmin, Sony, and Akaso in addition to all of the models offered by the originator of the action camera world, GoPro. Our mounts also work well with the GoPro Media Mod for those that want to take things to a slightly higher level.
Our mount is ready for all the turns, jumps, and hillclimbs that you can handle, so show your fans on YouTube, Instagram, Facebook, TikTok, and any other platform how epic your rides are!
This helmet may also be called:
- VX-Pro 4 resolute
- VX-Pro 4 block
- VX-Pro 4 stanton
- VX-Pro 4 scoop
- VX-Pro 4 barcia 3
- VX-Pro 4 sprint
- VX-Pro 4 pure
- VX-Pro 4 machine
- VX-Pro 4 black frost
- VX-Pro 4 slash
- VX-Pro 4 combat
- VX-Pro
- VX-P 4
- VXPro4
- Arai MX-V
- MX-V
- MXV
Camera Compatibility
Our action camera chin mounts are compatible with all GoPro models (Hero 11,10,9,8,7,6,5...) along with many other cameras such as models from Akaso, Garmin, DJI, or Sony. Our mounts are designed to accomodate GoPro's camera protective cases or their Media Mod and will give you excellent tilt-back angles even when you use a case or mod.
*some camera models may require an adaptor (sold on Amazon, Walmart, etc) to convert to the GoPro style mounting forks.
Crash Proof Chin Mounts
The WannaBes chin mounts are now made from a flexible material called TPU which is nearly indestructable. Not only is it practically impossible to break one of our mounts, the rubberized material also acts as a damper for any impact to your camera, helping keep your whole system safer in a crash!
Installation Instructions
1. Test mount position on helmet
2. Remove backing of 3M tape
3. Spread mount wings gently
4. Install on helmet ensuring full contact on whole tape surface.
*watch our install video for details
All Day GoPro Battery
Checkout our video on how to run your GoPro all day without changing the batter!
Checkout Our Blog
Scott Strike eRIDE 930 eMTB | Electric Mountain Bike Review, Unboxing & First Ride | Enduro Cycling
Fly Trekker and Kinetic Helmet Chin Mounts For GoPro Hero, DJI Osmo, Insta360 Action Cameras
How to Check & Adjust 2021 KTM 500 EXC-F Shim Valves | 130 Hour 4 Stroke Dirt Bike Maintenance

Designed and Assembled in the United States by a Family Owned Business!
Shop risk free with low cost domestic shipping and hassle free returns!
Designed and Assembled in the United States by a Family Owned Business!
Shop risk free with low cost domestic shipping and hassle free returns!