Chin Mount for AIROH TWIST 2.0 Helmets








CHIN MOUNT FOR AIROH TWIST 2.0 HELMETS
The Original Twist was one of their best selling helmets, so Airoh did it again, you know, because twisting time is here. Not one to miss out on a good Chubby Checker reference or two, we made a chin mount for it.
WHY CHIN MOUNTING?
Chin mounted action cameras provide, in our opinion, the best angle to properly document even the toughest of trails. Round and round, up and down they go?
No problem.
Our chin mounts allow for the perfect tip back angle making it so your action camera of choice is parallel with your eyeport. This means that you get just the right amount of your bars in the frame. Even when things are really hummin’, you get perspective as to how tough your ride was, and since you go where you look, your camera will follow the action.
Chin-mounting also puts the camera in the perfect spot to pick up audio for the vlogger on the go. Whether you are giving a detailed description of the trail or laughing at your buddy who stalled on the hill climb, you will get clear audio, with or without the GoPro Media Mod.
DESIGNED BY RIDERS, FOR RIDERS
Being riders ourselves we understand that little things like providing the ability to change batteries without removing the camera by placing the mounting screw on the opposite side of the access door on most GoPro cameras get you back on the trail quicker. If you do remove the camera, we included markings on the mount so you spend less time getting the same angle.
INDESTRUCTIBILITY, WE GUARANTEE IT
We 3D print our mounts using TPU, a rubbery material that is flexible enough to twist, twist again and then be run over by a truck, yet stiff enough to be a stable platform to record video. Yes, we tried it, and no we don’t think that the helmet or camera would have survived the “truck test”, or even the twist test. Please don’t try any of that at home. We are so confident that you will not be able to break our mounts that we will replace one if you are able to. Our mounts are secured to your helmet using the same 3M tape that GoPro does for a secure yet removable solution to your mounting needs. If you do decide to try and run your helmet over with a truck, we also sell replacement tape so you can reuse your mount on your new Airoh Twist 2.0.
FITS MOST CAMERAS
We know that while GoPros are everywhere that they aren’t the only game in town. This is why we made sure that our mounts work with most camera offerings, including those from DJI, Garmin, Sony, and Akaso in addition to all of the models offered by the originator of the action camera world, GoPro. Our mounts also work well with the GoPro Media Mod for those that want to take things to a slightly higher level.
Our mount is ready for all the twists and turns, so show your fans on YouTube, Instagram, Facebook, TikTok, and any other platform again and again how epic your rides are!
This helmet model may also be called:
- TWIST 2.0 sword
- TWIST 2.0 rockstar 22
- TWIST 2.0 tc21
- TWIST 2.0 hell
- TWIST 2.0 lift
- TWIST 2.0 bit
- TWIST 2.0 tech
- TWIST 2.0 lazyboy
- TWIST 2.0 mad
- TWIST 2.0 color
Camera Compatibility
Our action camera chin mounts are compatible with all GoPro models (Hero 11,10,9,8,7,6,5...) along with many other cameras such as models from Akaso, Garmin, DJI, or Sony. Our mounts are designed to accomodate GoPro's camera protective cases or their Media Mod and will give you excellent tilt-back angles even when you use a case or mod.
*some camera models may require an adaptor (sold on Amazon, Walmart, etc) to convert to the GoPro style mounting forks.
Crash Proof Chin Mounts
The WannaBes chin mounts are now made from a flexible material called TPU which is nearly indestructable. Not only is it practically impossible to break one of our mounts, the rubberized material also acts as a damper for any impact to your camera, helping keep your whole system safer in a crash!
Installation Instructions
1. Test mount position on helmet
2. Remove backing of 3M tape
3. Spread mount wings gently
4. Install on helmet ensuring full contact on whole tape surface.
*watch our install video for details
All Day GoPro Battery
Checkout our video on how to run your GoPro all day without changing the batter!
Checkout Our Blog
Scott Strike eRIDE 930 eMTB | Electric Mountain Bike Review, Unboxing & First Ride | Enduro Cycling
Fly Trekker and Kinetic Helmet Chin Mounts For GoPro Hero, DJI Osmo, Insta360 Action Cameras
How to Check & Adjust 2021 KTM 500 EXC-F Shim Valves | 130 Hour 4 Stroke Dirt Bike Maintenance

Designed and Assembled in the United States by a Family Owned Business!
Shop risk free with low cost domestic shipping and hassle free returns!
Designed and Assembled in the United States by a Family Owned Business!
Shop risk free with low cost domestic shipping and hassle free returns!