Skip to content

Chin Mount for AIROH COMMANDER Helmets

Regular price $49.99

Unit price per 

Every chin mount comes complete with:
*Version 2.0 "Unbreakable" chin mount
*Standard GoPro style screw
*Alcohol prep pad for cleaning
*Badass WannaBes stickers

Important Notes:

-Helmet NOT included

-GoPro NOT included

-Light NOT included

-Customs charges may apply to international deliveries and are your responsibility.


Take control of your video production with a custom 3D printed chin mount for your Airoh Commander and get perfect videos of your canyon runs, on-road and off.


It doesn’t matter where you ride, people point and laugh at your “teletubbie” top-mounted camera, and even worse, your videos look as goofy as you do.

Chin mounting puts the camera into the action, not above it, and shows the world a more accurate view of just how tricky that single track was.

Our mounts allow you to apply the perfect amount of tip-back angle, making the camera parallel with your eyeport.  You get just the right amount of your bars in the frame giving perspective as to how big those rocks were or how far over the centerline that texting driver was. Since you go where you look, your camera will follow the action.

Chin-mounting also puts the camera in the perfect spot to pick up audio for the vlogger on the go. Whether you are yelling at your buddy to get out of your way on the trail or singing along to Talylor Swift on your commute to work, you will get clear audio, with or without the GoPro Media Mod.


Being riders ourselves we understand that little things like providing the ability to change batteries without removing the camera by placing the mounting screw on the opposite side of the access door on most GoPro cameras get you back on the trail quicker. You can still remove the camera, obviously, and to keep your videos consistent we included markings on the mount so you spend less time getting the same camera angle. 


Since we ride, too, we understand that occasionally gravity is not our friend. We 3D print our mounts using TPU, a rubbery material that is flexible enough to give a little if you hit the deck without sacrificing the stability needed to get epic video. We are so confident that you will not be able to break our mounts that we will replace one if you are able to. Our mounts are secured to your helmet using the same 3M tape that GoPro does for a secure yet removable solution to your mounting needs. If you crash hard enough to require a new Airoh Commander, we also sell replacement tape so you can reuse your mount on your new lid.


Variety is the spice of life, so we made sure that our mounts work with most camera offerings, including those from DJI, Garmin, Sony, and Akaso in addition to all of the models offered by the originator of the action camera world GoPro. Our mounts also work well with the GoPro Media Mod for those that want to take things to a slightly higher level.

Our mount puts you in charge, so show your fans on YouTube, Instagram, Facebook, TikTok, and any other platform what a well trained rider on a trail/canyon weapon can do.

This helmet model may also be called:

  • COMMANDER full carbon gloss
  • COMMANDER skill
  • COMMANDER boost
  • COMMANDER color

Camera Compatibility

Our action camera chin mounts are compatible with all GoPro models (Hero 11,10,9,8,7,6,5...) along with many other cameras such as models from Akaso, Garmin, DJI, or Sony. Our mounts are designed to accomodate GoPro's camera protective cases or their Media Mod and will give you excellent tilt-back angles even when you use a case or mod.

*some camera models may require an adaptor (sold on Amazon, Walmart, etc) to convert to the GoPro style mounting forks.

Crash Proof Chin Mounts

The WannaBes chin mounts are now made from a flexible material called TPU which is nearly indestructable. Not only is it practically impossible to break one of our mounts, the rubberized material also acts as a damper for any impact to your camera, helping keep your whole system safer in a crash!

Installation Instructions

1. Test mount position on helmet

2. Remove backing of 3M tape

3. Spread mount wings gently

4. Install on helmet ensuring full contact on whole tape surface.

*watch our install video for details

Fequently Asked Questions

All Day GoPro Battery

Checkout our video on how to run your GoPro all day without changing the batter!

Read the blog instead

Checkout Our Blog

Scott Strike eRIDE 930 eMTB | Electric Mountain Bike Review, Unboxing & First Ride | Enduro Cycling

Before you start telling us that e-bikes are cheating, let me remind you that we are the “WannaBes”, and, since we have no intent on going into professional mountain biking there is no such thing as cheating. Get over it, and remember that riding anything is supposed to be fun...

Fly Trekker and Kinetic Helmet Chin Mounts For GoPro Hero, DJI Osmo, Insta360 Action Cameras

While the mission to equip everyone with the ultimate action camera mount will forever be ongoing, it is nice to feel a sense of completion every once in a while. Over at WannaBes world HQ, we are basking in the glow of ticking the last two boxes as we introduce the final chin mounts for the Fly line of helmets - The Trekker for you ADV riders out there, and the Kinetic for those that prefer that their tires stay more or less in the dirt.

How to Check & Adjust 2021 KTM 500 EXC-F Shim Valves | 130 Hour 4 Stroke Dirt Bike Maintenance

Kjeld isn’t lazy, he just put off all maintenance on his KTM 500 EXC-F for about 130 hours...
Designed & Built in the United States

Designed and Assembled in the United States by a Family Owned Business!

Shop risk free with low cost domestic shipping and hassle free returns!

Close (esc)


Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.


Your cart is currently empty.
Shop now