Chin Mount for AGV AX9 Helmets
CHIN MOUNT FOR AGV AX9 HELMETS CAMERAS
Since you already own an AGV AX9 helmet, we don’t need to tell you just how versatile it is. You obviously know your stuff, having chosen a lid that can go from street to dirt use just by removing the ultra-panoramic visor. But did you know it could be even more versatile?
WHY CHIN MOUNTING?
All you have to do is add one of our 3D printed chin mounts that we designed specifically for the AX9. Our chin mounts are designed to hold your action camera of choice at an angle that best captures your ride. We refer to this as tip-back angle, it is what separates epic ride videos from ones that don’t capture the trails (or roads, if that is your preference) as they were meant to be seen.
When you tip the camera back to be parallel with your eyeport, you get just the right amount of your bars in the frame giving perspective as to how tough your ride was, and since you go where you look, your camera will follow the action.
Chin-mounting also puts the camera in the perfect spot to pick up audio for the vlogger on the go. Whether you are cursing traffic or screaming with joy as you send it up your favorite bit of single track, you will hear it on playback.
DESIGNED BY RIDERS, FOR RIDERS
Like AGV did with the AX9, we made our mount ready for just about anything, and we made it easy to use. For example we put the mounting screw on the opposite side allowing for better access to the battery door on most GoPro cameras. This allows you to swap batteries without removing your camera. If you decide to remove the camera for any reason, we included markings on the mount so you spend less time getting the same camera angle.
INDESTRUCTIBILITY, WE GUARANTEE IT
AGV constructed the AX9 out of fiberglass, and were the first company to do so back in the day. Our mounts are 3D printed using TPU, a rubbery material that is rigid enough to keep your camera steady, but flexible enough to be run over with a truck and still work. Yes, we tried it, and no we don’t think that the helmet or camera would have the same results…please don’t try that at home. We are so confident that you will not be able to break our mounts that we will replace one if you are able to. We use the same 3M tape that GoPro does for their mounts for a secure yet removable solution to your mounting needs. We also sell replacement tape if you decide to get another helmet of the same model.
FITS MOST CAMERAS
Not everybody runs a GoPro, so we made sure that our mounts work with most camera offerings, including those from DJI, Garmin, Sony, and Akaso in addition to all of the models offered by the originator of the action camera world. Our mounts also work well with the GoPro Media Mod for those that want to take things to a slightly higher level.
Make your versatile helmet even better. Treat yourself to the best helmet chin mount in the business and get out on the bike! Your fans on YouTube, Instagram, Facebook, TikTok, and any other platform will thank you for it!
Camera Compatibility
Our action camera chin mounts are compatible with all GoPro models (Hero 11,10,9,8,7,6,5...) along with many other cameras such as models from Akaso, Garmin, DJI, or Sony. Our mounts are designed to accomodate GoPro's camera protective cases or their Media Mod and will give you excellent tilt-back angles even when you use a case or mod.
*some camera models may require an adaptor (sold on Amazon, Walmart, etc) to convert to the GoPro style mounting forks.
Crash Proof Chin Mounts
The WannaBes chin mounts are now made from a flexible material called TPU which is nearly indestructable. Not only is it practically impossible to break one of our mounts, the rubberized material also acts as a damper for any impact to your camera, helping keep your whole system safer in a crash!
Installation Instructions
1. Test mount position on helmet
2. Remove backing of 3M tape
3. Spread mount wings gently
4. Install on helmet ensuring full contact on whole tape surface.
*watch our install video for details
All Day GoPro Battery
Checkout our video on how to run your GoPro all day without changing the batter!
Checkout Our Blog
Scott Strike eRIDE 930 eMTB | Electric Mountain Bike Review, Unboxing & First Ride | Enduro Cycling
Fly Trekker and Kinetic Helmet Chin Mounts For GoPro Hero, DJI Osmo, Insta360 Action Cameras
How to Check & Adjust 2021 KTM 500 EXC-F Shim Valves | 130 Hour 4 Stroke Dirt Bike Maintenance
Designed and Assembled in the United States by a Family Owned Business!
Shop risk free with low cost domestic shipping and hassle free returns!
Designed and Assembled in the United States by a Family Owned Business!
Shop risk free with low cost domestic shipping and hassle free returns!