Chin Mount for 6D ATB-1 MTB Helmets








Mountain Bike Chin Mounts
According to 6D, ATB stands for Advanced Technology Bike, so it is fitting that we make a custom chin mount for it.
In case you were not aware, our 3D printed chin mounts are designed specifically for each helmet for not only the best camera angles in the business (we might be biased on that one), but to assure that when you attach your action camera of choice that it doesn’t interfere with any of the helmet’s features. Much like the ATB-1 helmet that this mount is for, our features are pretty advanced in the action camera mounting world.
Best possible POV
We figured out a while ago that having the correct amount of tip-back angle is key in accurately documenting your rides, which is the whole point, right? None of that top mount silliness that makes obstacles and trails look easier than they were. Our mounts put your viewers in the action with just the right amount of bike and horizon in the shot for perspective. We even made it easy to remember how you had the camera positioned by including tilt indicator marks.
Another benefit of a chin-mounted camera is since it is pretty close to your mouth your camera will pick up all of your expletives as you chase your buddies down the hill at speeds fast enough to need to use those expletives. Also, since the camera will be pointed where your head goes, you can capture the look on your buddy’s face as you fly by them in that one section they always check up and you leave the brake lever alone…you know the spot.
Made by experience riders
We designed our mounts to be lightweight and to not interfere with the functionality of your helmet, and made them easy to use. Take the mounting screw for example. We reversed it from the standard direction to allow you to access the battery door on your GoPro without removing the camera. Our mounts also work with the GoPro Media Mod. If you prefer another brand of camera such as the offerings from Akaso, Garmin, DJI, or Sony you can sleep well knowing that our mounts work with pretty much all of those.
Our mounts are virtually indestructible, too, so feel free to send it as hard as you want. We are so sure of the durability of our mounts that we will replace yours if you manage to break it. We ran one over with a truck before extending this offer, and it was still ready for work after doing so.
Indestructability warranty
Speaking of crashing…
Our mounts are the perfect match for the 6D ATB-1 when it comes to durability. The ATB-1 has a carbon fiber shell fitted with some proprietary dual-layered ODS EPS liner. Those acronyms mean that this lid provides exceptional protection against the forces of physics on your brain if you do hit the deck on your rides, making the ATB-1 as close to a gold-standard when it comes to the most extreme forms of mountain biking and BMX competition.
Mount your camera, send it, and share your epicness with the world.
This helmet model may also be called:
- ATB-1 dh/bmx
- ATB-1 solid
- ATB-1 switch
- ATB-1 flight
- ATB-1 tactical
Camera Compatibility
Our action camera chin mounts are compatible with all GoPro models (Hero 11,10,9,8,7,6,5...) along with many other cameras such as models from Akaso, Garmin, DJI, or Sony. Our mounts are designed to accomodate GoPro's camera protective cases or their Media Mod and will give you excellent tilt-back angles even when you use a case or mod.
*some camera models may require an adaptor (sold on Amazon, Walmart, etc) to convert to the GoPro style mounting forks.
Crash Proof Chin Mounts
The WannaBes chin mounts are now made from a flexible material called TPU which is nearly indestructable. Not only is it practically impossible to break one of our mounts, the rubberized material also acts as a damper for any impact to your camera, helping keep your whole system safer in a crash!
Installation Instructions
1. Test mount position on helmet
2. Remove backing of 3M tape
3. Spread mount wings gently
4. Install on helmet ensuring full contact on whole tape surface.
*watch our install video for details
All Day GoPro Battery
Checkout our video on how to run your GoPro all day without changing the batter!
Checkout Our Blog
Scott Strike eRIDE 930 eMTB | Electric Mountain Bike Review, Unboxing & First Ride | Enduro Cycling
Fly Trekker and Kinetic Helmet Chin Mounts For GoPro Hero, DJI Osmo, Insta360 Action Cameras
How to Check & Adjust 2021 KTM 500 EXC-F Shim Valves | 130 Hour 4 Stroke Dirt Bike Maintenance

Designed and Assembled in the United States by a Family Owned Business!
Shop risk free with low cost domestic shipping and hassle free returns!
Designed and Assembled in the United States by a Family Owned Business!
Shop risk free with low cost domestic shipping and hassle free returns!