Chin Mount for LS2 SUBVERTER Helmet
Capture your riding from the best possible POV with a chin mount that’s made to meet your needs as a rider.
Special Features:
- LS2 Subverter-Specific Chin Mount
- Ultra-Strong & Lightweight 3D Printed Mount
- Secure 3M Tape Installation Won’t Damage Your Helmet
- Tilt Indicator & Reversible Camera Positioning
- Protects Camera from Branches & Scrapes
- Snug Fit to Avoid Drift
- Amazing Vocal Reception
LS2 made their Subverter helmet to be durable using their proprietary “Kinetic Polymer Alloy” shell which they bill as both strong and lightweight. The Subverter was also designed to be pretty breezy, incorporating 35 vents in their KPA shell. Weighing in at just shy of 3.5 pounds, that is the equivalent of about 14 quarter-pounder (with cheese) sandwiches from a well known fast food chain, so the weight claim might be a little suspect, but we can attest to the existence of the vents.
Those vents made designing an action camera chin mount for this helmet a bit trickier than most of the others that we have made. Getting it to extend far enough from the chinbar to allow the camera to have enough “tip back” angle and not have our mount extend the entire length of the helmet took some work, but we are pretty proud of this design. Tip back angle is important as it allows you to align the camera with your eyeport on the helmet to get a parallel view of the terrain - a little of the bike, a little of the horizon - you know, the perfect perspective.
Facts & Features
Our LS2 Subverter helmet mounts are designed by riders and YouTubers with years of experience creating exciting immersive videos! The WannaBes are enthusiastic riders who expect better from our helmet mounts and video gear.
Ideal for motocross and other riding styles, you’ll get the perfect camera every time from a mount that’s made to complement the curves and style of LS2 Subverter helmets.
This helmet may also be called:
- LS2 SUBVERTER Glory
- LS2 SUBVERTER Laser
- LS2 SUBVERTER Holo-burst
- LS2 SUBVERTER Supercollider
- LS2SUBVERTER
Camera Compatability
Our GoPro chin mounts are compatible with all GoPro models (10,9,8,7,6,5...) available and along with many other models such as Akaso, Garmin, DJI, or Sony. Our mounts are designed to accomodate GoPro camera protective cases or the GoPro Media Mod and will give you excellent tilt-back angles even when you use a case or mod.
*some camera models may require an adaptor (sold on Amazon, Walmart, etc) to convert to the GoPro style mounting forks.
Crash Proof Chin Mounts
The WannaBes chin mounts are now made from a flexible material called TPU which is nearly indestructable. Not only is it practically impossible to break one of our mounts, the rubberized material also acts as a damper for any impact to your camera, helping keep your whole system safer in a crash!
Installation Instructions
1. Test mount position on helmet
2. Remove backing of 3M tape
3. Spread mount wings gently
4. Install on helmet ensuring full contact on whole tape surface.
*watch our install video for details
All Day GoPro Battery
Checkout our video on how to run your GoPro all day without changing the batter!
Checkout Our Blog
Idle & Cold Start Screw adjustment how-to | late model KTM EXC dirt bikes with EFI systems
How To Change And Bleed 🛠🏍 Front KTM Brembo Brakes | Replace Brake Pads and Brake Fluid
2021 KTM 500 EXC-F | First ride review, initial impressions | Monster Torque, but needs pipe and ECU
Designed and Assembled in the United States by a Family Owned Business!
Shop risk free with low cost domestic shipping and hassle free returns!
Designed and Assembled in the United States by a Family Owned Business!
Shop risk free with low cost domestic shipping and hassle free returns!