Skip to content

Now Shipping to USA, Europe, Canada, and more! | 10% off orders over $100

Chin Mount for KLIM F5 Helmets

Regular price $ 835.00

Unit price per 

Every chin mount comes complete with:
*Version 2.0 "Unbreakable" chin mount
*Standard GoPro style screw
*Alcohol prep pad for cleaning
*Badass WannaBes stickers

Important Notes:

-Helmet NOT included

-GoPro NOT included

-Customs charges may apply to international deliveries and are your responsibility.

GoPro Camera Helmet Mount for KLIM F5 Helmets

Keep your action camera secure on any adventure! This high-tech 3D-printed chin mount for the KLIM F5 helmet is designed for riders, by riders. The WannaBes team has thoughtfully designed this chin mount after years of extreme enduro experience to deliver the best POV video possible. Find the best angles, precision fit, and the best action-ready style with the WannaBe GoPro camera helmet chin mount.

Special Features:

  • Perfectly complements the KLIM F5 helmet’s style and fit
  • Super lightweight for maximum comfort
  • Advanced material strong enough to hold up to 20lbs static weight
  • Uses 3M tape, NO drilling, clamps, velcro, or straps necessary
  • Easy access to battery doors on later GoPro models

Specially Designed for the KLIM F5 Helmet

Unlike generic GoPro camera helmet mounts, this mount is specially designed for the KLIM F5 helmet. This ensures a perfect fit and maximum protection for your camera on even the most intense dirt bike adventures. The precision design and strategic location allow for the best POV camera angles and eliminates the risk for branch damage or awkward footage angles.

 This helmet may also be called:

  • KLIM F5 Koroyd
  • KLIM F5 Legion
  • KLIM F5 Shred
  • KLIM F5 Topo Potter's
  • KLIM F5 Ascent
  • KLIM F5 Tacktic
  • KLIM F5 Ops Black
  • KLIM F5 Koretek
  • KLIM F5 Chasm
  • KLIM F5 Abyss
  • KLIMF5

Camera Compatability

Our GoPro chin mounts are compatible with all GoPro models (10,9,8,7,6,5...) available and along with many other models such as Akaso, Garmin, DJI, or Sony. Our mounts are designed to accomodate GoPro camera protective cases or the GoPro Media Mod and will give you excellent tilt-back angles even when you use a case or mod.

*some camera models may require an adaptor (sold on Amazon, Walmart, etc) to convert to the GoPro style mounting forks.

Crash Proof Chin Mounts

The WannaBes chin mounts are now made from a flexible material called TPU which is nearly indestructable. Not only is it practically impossible to break one of our mounts, the rubberized material also acts as a damper for any impact to your camera, helping keep your whole system safer in a crash!

Installation Instructions

1. Test mount position on helmet

2. Remove backing of 3M tape

3. Spread mount wings gently

4. Install on helmet ensuring full contact on whole tape surface.

*watch our install video for details

Fequently Asked Questions

All Day GoPro Battery

Checkout our video on how to run your GoPro all day without changing the batter!

Read the blog instead

Checkout Our Blog

Idle & Cold Start Screw adjustment how-to | late model KTM EXC dirt bikes with EFI systems

I pointed out in my first ride video for my KTM 500EXC-F that the bike had a tendency to flame out quite a bit more than I thought it should, and after adding the GET ECU, I had a few issues restarting the beast. Both situations were pretty frustrating, and of course I caught them both on video. Here's how to fix that. 

How To Change And Bleed 🛠🏍 Front KTM Brembo Brakes | Replace Brake Pads and Brake Fluid

As they say, brakes only slow you down, but putting fresh pads on your machine shouldn't cost you too much time. If you have a KTM and need to replace your worn pads, it is actually a pretty simple task with a short list of tools required.

2021 KTM 500 EXC-F | First ride review, initial impressions | Monster Torque, but needs pipe and ECU

The WannaBes team recently picked up two brand new 2021 KTM 500 EXC-F enduro bikes from Malcom Smith Motorsports in Riverside, CA. After swapping out the stock street tires for some proper knobbies and adding a few pieces of armor, we take the bikes out for their first enduro ride and give you our first impressions raw from the trail.
Designed & Built in the United States

Designed and Assembled in the United States by a Family Owned Business!

Shop risk free with low cost domestic shipping and hassle free returns!

Close (esc)


Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.



Your cart is currently empty.
Shop now