Chin Mount for ALPINESTARS SM5 Helmets
Action Cam Helmet Mount for Alpinestars SM5
With an Alpinestars SM5 helmet chin mount, you can capture your ride exactly as you see it. Our chin mounts are designed by extreme riders and YouTube content creators and offer the best POV for the most immersive action videos. Discover how our action cam helmet mount can transform your riding content today.
Special Features:
- Helmet-Specific Design
- Ultra-Strong, Featherlight 3D Printed
- Can Hold Up to 20 Lbs.
- Great Vocal Reception
- Protective Mounting
- No Drift
- Tilt Indicator with Reversible Camera Position
- Battery Accessible Without Removing the Screw
Features & Facts
Alpinestars has five decades of experience in developing protective gear, and this particular lid has five years of specific product development behind it. It was designed for maximum protection and features a five density EPS liner (are you beginning to understand where the name came from?) and is designed to limit collarbone injuries in addition to the obvious first job of protecting your noggin.
It only makes sense that we made sure to put as much thought into designing the GoPro chin mount for the SM5 as Alpinestars did when they produced the helmet itself. While we didn’t spend five years on the design (obviously) the final version of our chin mount did have 24 versions that came before it that we deemed unacceptable. We wanted something that not only looked like it was an extension of the SM5, but also performed at the same level as the Alpinestars product that it was being used with.
Checkout our blog article about the SM5 Chin Mount!
This helmet model may also be called:
- SM5 venture
- SM5 bond
- SM5 beam
- SM5 rayon
- SM5 rover
- SM5 compass
- SM5 solid
Camera Compatability
Our GoPro chin mounts are compatible with all GoPro models (10,9,8,7,6,5...) available and along with many other models such as Akaso, Garmin, DJI, or Sony. Our mounts are designed to accomodate GoPro camera protective cases or the GoPro Media Mod and will give you excellent tilt-back angles even when you use a case or mod.
*some camera models may require an adaptor (sold on Amazon, Walmart, etc) to convert to the GoPro style mounting forks.
Crash Proof Chin Mounts
The WannaBes chin mounts are now made from a flexible material called TPU which is nearly indestructable. Not only is it practically impossible to break one of our mounts, the rubberized material also acts as a damper for any impact to your camera, helping keep your whole system safer in a crash!
Installation Instructions
1. Test mount position on helmet
2. Remove backing of 3M tape
3. Spread mount wings gently
4. Install on helmet ensuring full contact on whole tape surface.
*watch our install video for details
All Day GoPro Battery
Checkout our video on how to run your GoPro all day without changing the batter!
Checkout Our Blog
Idle & Cold Start Screw adjustment how-to | late model KTM EXC dirt bikes with EFI systems
How To Change And Bleed 🛠🏍 Front KTM Brembo Brakes | Replace Brake Pads and Brake Fluid
2021 KTM 500 EXC-F | First ride review, initial impressions | Monster Torque, but needs pipe and ECU
Designed and Assembled in the United States by a Family Owned Business!
Shop risk free with low cost domestic shipping and hassle free returns!
Designed and Assembled in the United States by a Family Owned Business!
Shop risk free with low cost domestic shipping and hassle free returns!