Skip to content

Now Shipping to USA, Europe, Canada, and more! | 10% off orders over $100

Chin Mount for AIROH COMMANDER Helmets

Regular price $ 835.00

Unit price per 

Every chin mount comes complete with:
*Version 2.0 "Unbreakable" chin mount
*Standard GoPro style screw
*Alcohol prep pad for cleaning
*Badass WannaBes stickers

Important Notes:

-Helmet NOT included

-GoPro NOT included

-Customs charges may apply to international deliveries and are your responsibility.

Airoh Commander GoPro Mount

There’s nothing quite like looking at a video of your ride and feeling like you’re right back in the action! With a chin mount made specifically for the Airoh Commander, Extreme Sports WannaBes delivers everything you could need in a camera mount. Through a collaboration of adventure riding enthusiasts and YouTubers, we’ve created the best mount for every type of rider. Check out all the details about the chin mount for the Airoh helmet to learn more!

Special Features:

  • Lightweight 3D Printed Product
  • Carrying Capacity of 20+ Lbs.
  • Snug Fit to Eliminate Drift
  • Protection from Scrapes & Falls
  • Reversible Camera Position
  • Tilt Indicator for Consistent Camera Angles
  • Reverse Screw for Easy Battery Access

Airoh Camera Mount Facts & Features

With tons of research and everyday use, we’ve discovered that a chin mount delivers the best viewing angle for any dirt bike video recording. With a helmet-specific mount for the Airoh Commander and our advanced design, chin mounts from Extreme Sports WannaBes take your video recordings to the next level.

Because this mount is fully compatible with the aerodynamic chin guard of the Airoh lineup, you never have to drill holes or put dangerous screws into your helmet. Simply use the included 3M tape for a secure, confident fit!

This helmet model may also be called:

  • COMMANDER full carbon gloss
  • COMMANDER skill
  • COMMANDER boost
  • COMMANDER color

Camera Compatability

Our GoPro chin mounts are compatible with all GoPro models (10,9,8,7,6,5...) available and along with many other models such as Akaso, Garmin, DJI, or Sony. Our mounts are designed to accomodate GoPro camera protective cases or the GoPro Media Mod and will give you excellent tilt-back angles even when you use a case or mod.

*some camera models may require an adaptor (sold on Amazon, Walmart, etc) to convert to the GoPro style mounting forks.

Crash Proof Chin Mounts

The WannaBes chin mounts are now made from a flexible material called TPU which is nearly indestructable. Not only is it practically impossible to break one of our mounts, the rubberized material also acts as a damper for any impact to your camera, helping keep your whole system safer in a crash!

Installation Instructions

1. Test mount position on helmet

2. Remove backing of 3M tape

3. Spread mount wings gently

4. Install on helmet ensuring full contact on whole tape surface.

*watch our install video for details

Fequently Asked Questions

All Day GoPro Battery

Checkout our video on how to run your GoPro all day without changing the batter!

Read the blog instead

Checkout Our Blog

Idle & Cold Start Screw adjustment how-to | late model KTM EXC dirt bikes with EFI systems

I pointed out in my first ride video for my KTM 500EXC-F that the bike had a tendency to flame out quite a bit more than I thought it should, and after adding the GET ECU, I had a few issues restarting the beast. Both situations were pretty frustrating, and of course I caught them both on video. Here's how to fix that. 

How To Change And Bleed 🛠🏍 Front KTM Brembo Brakes | Replace Brake Pads and Brake Fluid

As they say, brakes only slow you down, but putting fresh pads on your machine shouldn't cost you too much time. If you have a KTM and need to replace your worn pads, it is actually a pretty simple task with a short list of tools required.

2021 KTM 500 EXC-F | First ride review, initial impressions | Monster Torque, but needs pipe and ECU

The WannaBes team recently picked up two brand new 2021 KTM 500 EXC-F enduro bikes from Malcom Smith Motorsports in Riverside, CA. After swapping out the stock street tires for some proper knobbies and adding a few pieces of armor, we take the bikes out for their first enduro ride and give you our first impressions raw from the trail.
Designed & Built in the United States

Designed and Assembled in the United States by a Family Owned Business!

Shop risk free with low cost domestic shipping and hassle free returns!

Close (esc)

Popup

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Search

Your cart is currently empty.
Shop now