Skip to content

Now Shipping to USA, Europe, Canada, and more! | 10% off orders over $100

Leatt 3.5 and 5.5 helmet chin mount cover image

Leatt 3.5 & 5.5 Helmet Chin Mount For Action Cameras

It should come as no surprise that the company that is synonymous with neck braces made their helmets to offer incredible neck brace compatibility, which is why we aren’t even going to bring that up when we talk about the Leatt 3.5 and 5.5 helmets. Instead we will point out that both helmets from Leatt are designed to reduce the likelihood of your brain to rotate by up to 40%.in those extremely sudden stops caused by excessive gravity, the Leatt 3.5 and 5.5 will help slow your gray matter by up to 30%.

It was a no-brainer for us to design our chin mounts for the Leatt 3.5 and 5.5 helmets to extend far enough from the chinbar to allow the camera to have enough “tip back” to allow you to adjust the angle for when you are standing on your pegs. Tip back angle allows you to align the camera with your eyeport on the helmet to get a parallel view of the terrain - a little of the bike, a little of the horizon - you know, the perfect perspective.

We have found that the chin mount location is optimal for a POV camera for a couple of reasons. First, audio pick up is much better. With the camera in front of your mouth you can clearly hear yourself swearing as your buddy pulls away or when you hit the deck trying to catch them. Second, your camera does not stick out where a tree branch can knock it out of alignment, or worse, send it tumbling into the weeds or off the side of a cliff. While there is a chance that you may hit the camera if you crash, we have found that most people do their best to turn their head to avoid a face full of dirt whenever possible. Even if you do go chin first into a rock, we can promise you that the mount will not break.

That is a bold statement, one that we back up with a lifetime warranty. Hassle free, just let us know and we will get a new one out to you.

Our chin mounts are made of Thermoplastic Polyurethane which has rubber-like properties. This allows us to make mounts that are flexible enough to twist into a pretzel, but strong enough to keep your camera pointed exactly where you aim it without inducing vibration even at full boogie over rocky terrain. Attaching the mount to your Leatt 3.5 or 5.5 helmet is easy with the included and already attached waterproof 3M tape.

We designed the mounts for maximum convenience, not just durability. The GoPro mounting screw is on the opposite side making it easier to access the battery side door. We also have notches to help you get a consistent tip back angle every time.

The mounts are designed to be removable without leaving any residue on the helmet, and we do offer replacement 3M mounting tape if you want to reattach it later. That said, you will need to also pick up some Gorilla Clear Grip Glue (say that five times fast) to adhere the tape to the mount.

If you were wondering if our mounts work with the Media Mod, the answer is yes, so get out there and make some epic content.

In the box:

  • Chin Mount for the Leatt 3.5 & 5.5.
  • Mounting screw
  • Sweet WannaBes stickers.
  • Alcohol Pad

Optional Accessories Available For Purchase

 

Older Post
Newer Post

Leave a comment

Please note, comments must be approved before they are published

You may also enjoy

Idle & Cold Start Screw adjustment how-to | late model KTM EXC dirt bikes with EFI systems

I pointed out in my first ride video for my KTM 500EXC-F that the bike had a tendency to flame out quite a bit more than I thought it should, and after adding the GET ECU, I had a few issues restarting the beast. Both situations were pretty frustrating, and of course I caught them both on video. Here's how to fix that. 

How To Change And Bleed 🛠🏍 Front KTM Brembo Brakes | Replace Brake Pads and Brake Fluid

As they say, brakes only slow you down, but putting fresh pads on your machine shouldn't cost you too much time. If you have a KTM and need to replace your worn pads, it is actually a pretty simple task with a short list of tools required.

2021 KTM 500 EXC-F | First ride review, initial impressions | Monster Torque, but needs pipe and ECU

The WannaBes team recently picked up two brand new 2021 KTM 500 EXC-F enduro bikes from Malcom Smith Motorsports in Riverside, CA. After swapping out the stock street tires for some proper knobbies and adding a few pieces of armor, we take the bikes out for their first enduro ride and give you our first impressions raw from the trail.
Close (esc)

Popup

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Search

Your cart is currently empty.
Shop now